Campervan Mattress Toppers, Made to Your Shape
Add comfort or cooling to your campervan bed — each topper cut to your exact size and shape. Choose your topper, then your shape. Handmade in Britain.
Add an extra layer of comfort or cooling to your existing campervan mattress without replacing it — each topper is cut to your exact size and shape.
Bodyshapeâ„¢ Topper
Mattress too firm?
Lifestyle
Construction
Take the hardness out of a rock-and-roll bed without ripping it out — a memory-foam topper that lays over your existing van bed and cushions your shoulders, hips and knees.
An airy, climate-friendly cover that pulls the condensation of a shut-up van away from the surface so it stays fresh. Slide the zip and it goes straight in the machine.
Warmth-activated memory foam that melts to your shape and wraps your shoulders, hips and knees — and quietly deadens movement, so a partner shifting beside you on a tight bed is far less likely to stir you.
Stretchy corner straps anchor the topper to your bed while you sleep, then let you roll it down small to stow in a locker or lift it out when the bed folds away for the day.
Most factory van beds are unforgiving — a rock-and-roll bed, a slatted board or a fold-flat bench topped with thin foam that was never chosen with your back in mind. If you wake up stiff, there's no need to strip it out and start again. This memory-foam topper drops straight on top and lays down a soft, body-hugging layer over your shoulders, hips and knees, so a hard bed finally feels like one worth sleeping on — at a fraction of what a full mattress would cost.
Because the foam soaks up movement rather than passing it along, whoever climbs out first for the early walk or the dawn drive is far less likely to disturb the other on a narrow van bed. The secure-fit straps keep it pinned in place while you sleep, and it rolls down small when you need the bed back for daytime seating or want to take it with you.
A gentle lift that barely changes the feel of your bed
Our best seller — a real difference that still sits well on your bed
More cushioning and a deeper contour underneath you
A big step up, with deep sink-in body support
Our deepest — effectively a brand-new surface to sleep on
Every depth arrives with the cover, free storage straps, and a 2-year guarantee.
Give us the measurements and we cut the foam to match exactly; the cover then adds a few millimetres over the finished size.
Where the bed drops into a snug recess — common on VW and self-build conversions — or you like a bit of room to tuck sheets under, it's worth trimming a little off your figures, though that's entirely down to how you like it.
Coolplusâ„¢ Topper
Mattress too hot?
Lifestyle
Construction
Stop a shut-up van bed sleeping hot — a cool-gel topper, laboratory-proven 30× more breathable than memory foam, that lays over the mattress you already have.
Knitted with plus-shaped fibres that open up extra surface area to lift sweat off the skin and let it dry — clearing moisture quicker than cotton or ordinary polyester, which matters in the damp air of a closed-up van. Oeko-Tex Standard 100 certified, and the zip means it drops into the machine.
A cool-gel foam layer, laboratory-proven 30× more breathable than standard memory foam, so warmth escapes instead of pooling under you overnight. Medium in feel, with solid pressure relief and a livelier spring-back than the memory foam it replaces.
Stretchy corner straps hold the topper steady on the bed as you sleep, then let you roll it down small to tuck in a locker or lift out when the bed packs away for the day.
Replacing a van mattress is a serious spend — and if yours is comfortable enough but runs warm once the doors are shut for the night, you don't have to. This topper lays flat over your existing bed and drops a cool-gel layer on top, so a stuffy, heat-trapping bed sleeps cool and fresh again, all for a small fraction of a new mattress.
The cool gel lets air move far more freely than everyday memory foam, so heat never gathers under you as the van warms up, while the cover's plus-shaped fibres wick the damp away. With two secure-fit straps in the box you can pin it down for the night or roll it away by day — useful when you're following the good weather.
Our popular pick — a clear lift in cooling and comfort that sits happily on your current bed
The top-end depth — more cushioning, more cooling and deeper pressure relief
Both depths share the same medium feel and adaptive support.
Send us your measurements and the foam is cut to match precisely; the cover then adds a fraction over the finished size.
If the bed slots into a tight recess — as it often does on VW and coachbuilt conversions — or you like a margin for tucking bedding under, ease your figures down slightly, though how snug you go is really your call.
Loading reviews...
A topper is the quickest way to make the bed you already have in your van feel like a proper night’s sleep — to soften a firm rock-and-roll bench, take the ridge out of a seat-base cushion that folds down into a bed, or add a bit of warmth on a cold night parked up. The trouble with a shop-bought topper is that it only comes in standard sizes, so over a van bed — with its seat base, fold-out section and the odd wheel-arch cut-out — it never lies flat. We cut every topper to your van’s exact bed shape instead.
There are two to choose from above. The memory foam topper adds a soft, insulating layer that moulds to you and holds a little warmth on chilly nights; the cool-gel topper adds the same extra comfort but draws heat away, for summer touring or anyone who sleeps warm. Both are cut to your measurements and your shape — bench, fixed bed, pop-top bunk or a one-off — and both keep the weight down, which matters when every kilo counts against your van’s payload.
Each topper is made to order in Britain, then vacuum-rolled and boxed small enough to stow under a seat or in a locker. Choose your topper above to see your exact price in about a minute, or send us your measurements and we’ll cut it to fit.
That’s exactly what it’s for. A rock-and-roll or RIB bed is built firm because it’s a seat first and a bed second — a topper adds the soft layer it’s missing, so you’re not sleeping straight on the bench. Choose the memory foam version for the biggest change in feel.
If your van sleeps cold — and most do — the memory foam topper is the one: it cushions and adds a layer of insulation between you and a chilly seat base. If you tour in summer or in warmer places, or you sleep hot, the cool-gel topper gives you the same comfort while drawing heat away. Tell us how and when you travel and we’ll point you to the right one.
Yes — that’s the norm in a camper. Give us the made-up bed measurements (or a quick sketch of how the sections sit) and we cut the topper to match, including the join, so it lies flat across the whole bed rather than bridging the gap.
You choose the depth. For a rock-and-roll bed that has to fold back into a seat every day, a shallower topper keeps everything working; for a fixed bed you can go deeper for a more substantial feel. We’ll help you pick a depth that fits how your bed is used.
Not much — the fillings we use are chosen to stay light, because payload is tight in a campervan. It adds far less than carrying a second mattress, and it rolls down small so it’s easy to lift out and store when you need the space back.
Measure the made-up bed at its longest and its widest points, and note anything that isn’t a straight edge — a wheel-arch cut, a tapered end, a fold-out section. Enter those as you build, or send a photo and a sketch and we’ll follow your figures exactly.
Each topper is cut and made to order in Britain, so we confirm your date when you order rather than quote a fixed figure here. It arrives vacuum-rolled in a box, free anywhere on the UK mainland, ready to unroll and settle back into shape.
